To minimize potential exposure to influenza (flu) & other viruses, precautions are in effect until further notice.
Clinical Trials & Research
Oncology Nurse Navigators
High-Risk Cancer Genetics
See All Your Doctors in One Visit
Events & Support Groups
Fitness & Wellness
Home > Testing & Treatment > Radiation Therapy > TrueBeam
The TrueBeam System is an advanced radiotherapy system that opens up treatment options for some of the most complex cancers in areas such as the head and neck, lung, breast, abdomen and liver. The TrueBeam system’s advanced imaging and powerful treatment modes allow doctors to tailor treatments specific to your particular cancer.
The new TrueBeam system is an advanced radiotherapy technology for treating cancer. Opening up treatment options for people with cancer, it targets tumors with accuracy measured in millimeters. With its power and flexibility, clinicians can develop treatments that are best suited for patients’ individual circumstances. TrueBeam combines imaging, beam delivery and sophisticated motion management to accurately and precisely target tumors with speed.
Treatments with TrueBeam are fast. Most can be given within just minutes a day. Treatments that once took 10 to 30 minutes can now be completed in less than two minutes. In addition to enabling a more comfortable experience for the patient with less time on the treatment couch, faster delivery also allows for reduced chances of tumor motion during treatment, which helps protect nearby healthy tissue and critical organs.
Before and at any point during a treatment, the TrueBeam system can generate the three-dimensional images used to fine-tune tumor targeting in much less time (and with fewer X-rays) than was possible with earlier Varian technologies. These images can be used to fine-tune a patient’s position prior to and during the treatment process.
TrueBeam was also designed to enhance the patient experience. Thanks to an advanced communications system, the therapist running the system can be in constant contact with you. It’s almost as if they are there in the treatment room with you. And as part of this enhancement, TrueBeam has a music feature, which enables music to be played during treatment.
TrueBeam radiotherapy is not appropriate for all cancers. Serious side effects, including fatigue and skin irritation, can occur. Treatment times may vary. Ask your doctor if TrueBeam treatment is right for you.
The TrueBeam system is an advanced radiotherapy system from Varian Medical Systems. It was engineered from the ground up to deliver more powerful cancer treatments with pinpoint accuracy and precision. It uniquely integrates advanced imaging and motion management technologies within a sophisticated new architecture that makes it possible to deliver treatments more quickly while monitoring and compensating for tumor motion, opening the door to new possibilities for the treatment of lung, breast, prostate, head and neck, as well as other cancers.
A doctor may prescribe treatment with the TrueBeam system for many reasons. This technology gives medical professionals the tools to treat many different types of cancers.
Also, TrueBeam is fast. Simple treatments that once took 10 to 30 minutes can now be completed in less than two minutes. As well as allowing for a more comfortable experience for the patient with less time on the treatment couch, faster delivery also allows for reduced chances of tumor motion during treatment, which helps protect nearby healthy tissue and critical organs.
The precision of the TrueBeam system is measured in increments of less than a millimeter. This accuracy is made possible by the system’s sophisticated architecture, which synchronizes imaging, patient positioning, motion management, beam shaping and dose delivery, performing accuracy checks every ten milliseconds throughout the entire treatment.
TrueBeam imaging technology can produce the three-dimensional images used to fine-tune tumor targeting in 60% less time than previous Varian imaging technology. Additional functionality makes it possible to create images using 25% less X-ray dose. These images are used to fine-tune a patient’s position prior to and during the treatment process.
For lung and other tumors subject to respiratory motion, TrueBeam offers Gated RapidArc® radiotherapy, which makes it possible to monitor the patient’s breathing and compensate for movement of the tumor while the dose is being delivered in a continuous rotation of the treatment machine.
In addition to its impressive technical specifications, TrueBeam has also been designed with patient comfort in mind. It operates quietly and provides built-in music capabilities so the patient can listen to music during their treatment. The patient is in constant two-way communication with the therapist who operates the system. Plus the therapist will be able to visually monitor and see the patient through two closed-circuit television systems.
An effective treatment for cancer, radiotherapy has been used safely for many years — in fact, according to the American Society for Radiation Oncology (ASTRO), nearly two out of every three cancer patients receive some type of radiotherapy during their treatment. In basic terms, radiotherapy works by limiting the ability of cancer cells to grow and spread. Radiation disrupts the DNA of these fast-growing cancer cells and prevents them from replicating.
The radiation is generated by a machine called a medical linear accelerator. This machine shapes beams of energy with varying intensities, which can be aimed at a tumor from multiple angles to attack the target in a complete three-dimensional manner. In fact, TrueBeam’s treatment can be delivered with submillimeter accuracy and varying intensity. The idea is to deliver the lowest dose possible to the surrounding healthy tissue, while still delivering the maximum dose to the tumor.
Many people, when they hear the word “radiation,” think immediately of radioactive substances. However, no radioactive substances are involved in the creation of the beam by a medical linear accelerator. When a linear accelerator is switched “on,” radiation is produced and aimed directly at cancer cells. Then, like a flashlight, when the system is switched off, radiation is no longer emitted from the system.
TrueBeam treatment involves several basic steps: diagnosis, the planning of the individual treatment and the delivery of the treatment.
After their diagnosis, the medical physicist generates three-dimensional diagnostic images (usually CT or MRI) of the tumor and the area around it. They then use these images to specify the dose of radiation needed to treat the tumor. A radiation oncologist will work with a physicist to plan an individualized treatment.
After this, the patient receives individualized TrueBeam treatments according to a schedule specific to the treatment plan. The total dose of radiation is usually divided into smaller doses (called fractions) that are given daily over a specific time period.
During a TrueBeam treatment, the linear accelerator can rotate around the patient to deliver the radiation. The radiation is shaped and reshaped as it is continuously delivered from virtually every angle in a 360-degree revolution around the patient. Sometimes a marker block device is used to monitor breathing patterns to compensate for breathing motion during the treatment. Most treatments usually take only a few minutes a day.
X-rays and/or CT scans may be taken in preparation for planning the treatment. Following these scans, the treatment planning process can take several days. When the treatment plan is complete, TrueBeam radiotherapy treatments can begin.
Most cases require a treatment preparation session. Special molded devices that help the patient maintain the same position every day are sometimes developed at this point. The radiation oncologist may request to have the treatment area marked on the patient’s skin to assist in aligning the equipment with the target area.
The first TrueBeam treatment session may sometimes be longer than subsequent ones so that additional images can be acquired to check the positioning of the tumor on the day of the treatment. A typical TrueBeam treatment session lasts only a few minutes.
In the treatment room, the medical team may use the marks on the patient’s skin to locate the treatment area. Then the patient is positioned on a treatment table. Sometimes, special molded devices are used to help the patient stay still and provide correct positioning.
The radiation therapist can use the machine’s imaging capabilities to position the patient for a treatment that is accurate to less than a millimeter. These high-resolution X-rays of the targeted area verify they are in position before administering the treatment.
The radiation therapist then leaves the treatment room before the machine is turned on. The machine rotates around the patient to deliver the radiation beams, which are shaped by a special attachment called a multileaf collimator. This device has 120 computer-controlled mechanical “leaves” or “fingers” that can move to create apertures of different shapes and sizes.
The delivery of a patient’s treatments varies depending on the diagnosis, so the patient should ask their medical professional for information about their specific diagnosis. Generally, radiation therapy usually is given daily over several weeks.
External radiation therapy does not cause anyone’s body to become radioactive. A patient need not avoid being with other people because of treatment. Even hugging, kissing or having sexual relations with others poses no risk to them of radiation exposure.
Side effects of radiation therapy most often are related to the area that is being treated. A patient should consult with their medical professional to discuss the specific diagnosis, prognosis and possible side effects** from radiation treatment.
The exact cost of radiation therapy will depend on the type and number of treatments a patient needs. Many health insurance policies cover charges for radiotherapy. It's a good idea for a patient to talk with their insurer or with their doctor's office staff or the hospital business office about their policy and how expected costs will be paid.
The main advantages of the Varian TrueBeam system are ease, precision and speed. Thanks to its pinpoint accuracy, the TrueBeam system can be used to treat many different types of tumors, including those in sensitive areas such as the abdomen, liver, lung, breast, and head and neck.
Treatments focus powerful radiation on the tumor while minimizing exposure of surrounding healthy tissues. TrueBeam was designed from the ground up to seamlessly integrate sophisticated imaging and radiation delivery treatments. What this means for patients is accuracy, speed and comfort. What it means for medical professionals is the ability to treat many different types of complex cancer cases.
** The TrueBeam system may not be appropriate for all cancers. Serious side effects can occur, including fatigue and skin irritation. Treatment times may vary. Patients should ask their doctor if TrueBeam is right for their particular case.
See Frequently Asked Questions About Radiation Therapy.